1. Home
  2. Vol 10, No 11 (2024)
  3. Hidayawanti

Risk-Based Method-Technology Integration on Spun Pile Production for Product and Service Quality

Ranti Hidayawanti, Yusuf Latief, Vincent Gaspersz

Abstract


The research aims to identify the risk factors and the medium-high risks to use as the basis for the innovative method of spun pile manufacturing technology. The research uses the Delphi method to analyze and review the validity of content construction, pilot and respondent surveys, focus group discussions, and expert validation. The findings show utilizing and optimizing the technology on production machinery is influential for results on both product and service quality. The dominance category in the medium-risk technology indicates the need for improvement in the operator's competence. The result also indicates the largest medium risk is during the initial integration, Cutting and Heading at 84%, and the final step, Stressing and Spinning, at 59%. The research improvement to map the production process is related to the medium and high risks to know where and how the industry can improve. This risk-based technology and integration method is a proposed method using an approach to innovation management by reducing the risk values. Innovation by improving the standard operational procedure (SOP) was based on the relation of each activity during the integration within the risk category of medium-medium, medium-high, and high-high. We recommend improving SOP and utilizing information technology on precision for both subprocesses.

 

Doi: 10.28991/CEJ-2024-010-11-015

Full Text: PDF


Keywords


Risk; Method-Technology; Integration; Spun Pile.

References


Orozco, F., Serpell, A., & Olenaar, K. (2011). Competitiveness factors and indexes for construction companies: Findings of Chile. Revista de La Construccion, 10(1), 91–107. doi:10.4067/s0718-915x2011000100009.

Lomineishvili, K. (2021). How entrepreneurial management and continuous learning affect the innovation and competitiveness of companies? Economic Alternatives, 2021(3), 459–468. doi:10.37075/EA.2021.3.08.

Wang, Z., Wang, T., Hu, H., Gong, J., Ren, X., & Xiao, Q. (2020). Blockchain-based framework for improving supply chain traceability and information sharing in precast construction. Automation in Construction, 111. doi:10.1016/j.autcon.2019.103063.

Reichenbach, S., & Kromoser, B. (2021). State of practice of automation in precast concrete production. Journal of Building Engineering, 43. doi:10.1016/j.jobe.2021.102527.

Hidayawanti, R., & Latief, Y. (2023). Raw Material Optimization With Neural Network Method in Concrete Production on Precast Industry. International Journal of GEOMATE, 24(102), 10–17. doi:10.21660/2023.102.g12146.

Kosse, S., Vogt, O., Wolf, M., König, M., & Gerhard, D. (2022). Digital Twin Framework for Enabling Serial Construction. Frontiers in Built Environment, 8. doi:10.3389/fbuil.2022.864722.

Hidayawanti, R., Latief, Y., & Gaspersz, V. (2024). Perceptron model application for traceability risk in spun pile manufacturing. Journal of Infrastructure, Policy and Development, 8(6), 4638. doi:10.24294/jipd.v8i6.4638.

Nurjaman, H. N., Hariandja, B. H., & Sidjabat, H. R. (2008). The Use Of Precast Concrete Systems In The Construction Of Low-Cost Apartments In Indonesia. 14th World Conference on Earthquake Engineering (14WCEE), 22, 1–8. 12-17 October, 2008, Beijing, China.

Noerpratomo, A. (2018). The influence of raw material inventory and production processes on product quality at CV. Banyu Biru Connection. Almana: Jurnal Manajemen dan Bisnis, 2(2), 20-30. (In Indonesian).

Nurjaman, H., Faizal, L., Suaryana, N., Hariandja, B., Gambiro, Purnomo, & Wicaksono, S. (2017). Design, development, and application of precast and prestressed concrete system for rigid pavement in Indonesia. AIP Conference Proceedings, 1903, 030003. doi:10.1063/1.5011510.

Gault, F. (2013). The Oslo Manual. Economics 2013: Handbook of Innovation Indicators and Measurement, 41–59. doi:10.4337/9780857933652.00010.

Bateman, T., Snell, S., Konopaske, R. (2019). Management: Leading & Collaborating in a Competitive World (13th Ed). McGraw Hill, New York, United States.

Putra, R. E., & Isvara, W. (2023). Qualitative Risk Analysis of Production Precast Spun Pile at Company-X. United International Journal for Research & Technology, 05(01), 51–60.

Wiegmann, P. M., de Vries, H. J., & Blind, K. (2017). Multi-mode standardisation: A critical review and a research agenda. Research Policy, 46(8), 1370–1386. doi:10.1016/j.respol.2017.06.002.

Velasquez Villagran, N., Estevez, E., Pesado, P., & De Juanes Marquez, J. (2019). Standardization: A Key Factor of Industry 4.0. Sixth International Conference on eDemocracy & eGovernment (ICEDEG), 350–354. doi:10.1109/icedeg.2019.8734339.

Yang, J., Zhou, L., Qu, Y., Jin, X., & Fang, S. (2023). Mechanism of Innovation and Standardization Driving Company Competitiveness in the Digital Economy. Journal of Business Economics and Management, 24(1), 54–73. doi:10.3846/jbem.2023.17192.

Hyland, J., & Karlsson, M. (2021). Towards a management system standard for innovation. Journal of Innovation Management, 9(1), XI–XIX. doi:10.24840/2183-0606_009.001_0002.

Tidd, J. (2021). A Review and Critical Assessment of the ISO56002 Innovation Management Systems Standard: Evidence and Limitations. International Journal of Innovation Management, 25(1), 2150049. doi:10.1142/S1363919621500493.

Hoonsopon, D. (2009). The empirical study of the impact of product innovation factors on performance of new products: Radical and incremental product innovation. Ph.D. Thesis, Chulalongkorn University, Bangkok, Thailand.

Pan, M., & Pan, W. (2019). Determinants of Adoption of Robotics in Precast Concrete Production for Buildings. Journal of Management in Engineering, 35(5), 05019007. doi:10.1061/(asce)me.1943-5479.0000706.

Fu, Y., Downey, A., Yuan, L., Pratt, A., & Balogun, Y. (2021). In situ monitoring for fused filament fabrication process: A review. Additive Manufacturing, 38. doi:10.1016/j.addma.2020.101749.

O’g, B. O. N. (2021). The Role of Quality Management System in Increasing Product Quality in Enterprises. Web of Scientist: International Scientific Research Journal, 2(12), 228–233.

Feng, C., & Ma, R. (2020). Identification of the factors that influence service innovation in manufacturing enterprises by using the fuzzy DEMATEL method. Journal of Cleaner Production, 253. doi:10.1016/j.jclepro.2020.120002.

Nyadzayo, M. W., Leckie, C., & Johnson, L. W. (2023). Customer participation, innovative aspects of services and outcomes. Marketing Intelligence and Planning, 41(1), 1–15. doi:10.1108/MIP-03-2022-0090.

Truong, N. T., Dang-Pham, D., McClelland, R. J., & Nkhoma, M. (2020). Service innovation, customer satisfaction and behavioural intentions: a conceptual framework. Journal of Hospitality and Tourism Technology, 11(3), 529–542. doi:10.1108/JHTT-02-2019-0030.

Nimfa, D. T., Uzir, M. U. H., Maimako, L. N., Eneizan, B., Latiff, A. S. A. L., & Wahab, S. A. (2021). The Impact of Innovation Competitive Advantage on Product Quality for Sustainable Growth among SMEs: An Empirical Analysis. International Journal of Business Science and Applied Management, 16(3), 39–62. doi:10.69864/ijbsam.16-3.152.

Mohamed, H. A. E., & Eltohamy, A. I. (2022). Critical Success Factors for Competitiveness of Egyptian Construction Companies. Sustainability (Switzerland), 14(17). doi:10.3390/su141710460.

Aboutorab, H., Hussain, O. K., Saberi, M., Hussain, F. K., & Chang, E. (2021). A survey on the suitability of risk identification techniques in the current networked environment. Journal of Network and Computer Applications, 178. doi:10.1016/j.jnca.2021.102984.

Kasap, D., & Kaymak, M. (2007). Risk Identification Step of the Project Risk Management. PICMET ’07 - 2007 Portland International Conference on Management of Engineering & Technology, 2116–2120. doi:10.1109/picmet.2007.4349543.

Alfreahat, D., & Sebestyén, Z. (2022). A construction-specific extension to a standard project risk management process. Organization, Technology and Management in Construction, 14(1), 2666–2674. doi:10.2478/otmcj-2022-0011.

PMI (2021). The Standard for Project Management and a Guide to the Project Management Body of Knowledge (7th Ed.). PMBOK Guide, Project Management Institute (PMI), Upper Darby, United States.

Satyadharma, W. R. (2022). Optimization of the spun pile production process using connector rings on the mold. Seminar Nasional Insinyur Profesional (SNIP), 2(1). doi:10.23960/snip.v2i1.39.

Andika Okayana. (2023). Evaluation of Production Process Flow with Line Balancing Method to Increase Round Pile Production Capacity at PT. Adhi Persada Beton Plant Mojokerto-East Java. Jurnal Teknik Industri, 13(1), 90–97. doi:10.25105/jti.v13i1.17520.

Naim, M. A., Rimawan, E., & Putri, A. (2020). Relayout Production Facility of PC. Spun Pile Using Systematic Layout Planning in ABC Factory. International Journal of Innovative Science and Research Technology, 5(8), 1620–1629. doi:10.38124/ijisrt20aug614.

Pop, G. I., & Țîțu, A. M. (2021). Identifying the influence of technical resources knowledge on product quality requirements in a global engineering process. International Journal of Mechatronics and Applied Mechanics, 1(9), 225–231. doi:10.17683/ijomam/issue9.32.

Moreira, B. M. D. N., Gouveia, R. M., Silva, F. J. G., & Campilho, R. D. S. G. (2017). A Novel Concept of Production and Assembly Processes Integration. Procedia Manufacturing, 11, 1385–1395. doi:10.1016/j.promfg.2017.07.268.

Lager, T., Simms, C. D., & Frishammar, J. (2023). Managing Ideation and Concept Integration in the Product Innovation Work Process for Non-Assembled Products. International Journal of Innovation and Technology Management, 20(3), 2350016. doi:10.1142/S0219877023500165.

Fattouh, A., Chirumalla, K., Ahlskog, M., Behnam, M., Hatvani, L., & Bruch, J. (2023). Remote integration of advanced manufacturing technologies into production systems: integration processes, key challenges and mitigation actions. Journal of Manufacturing Technology Management, 34(4), 557–579. doi:10.1108/JMTM-02-2022-0087.

Kıral, I. A., Kural, Z., & Çomu, S. (2014). Risk identification in construction projects: Using the Delphi method. 11th International Congress on Advances in Civil Engineering, 21-25 October, 2014, Istanbul, Turkey.

Renzi, A. B., & Freitas, S. (2015). The Delphi Method for Future Scenarios Construction. Procedia Manufacturing, 3, 5785–5791. doi:10.1016/j.promfg.2015.07.826.

Fielding, N. G. (2012). Triangulation and Mixed Methods Designs: Data Integration with New Research Technologies. Journal of Mixed Methods Research, 6(2), 124–136. doi:10.1177/1558689812437101.


Full Text: PDF

DOI: 10.28991/CEJ-2024-010-11-015

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Copyright (c) 2024 Ranti Hidayawanti, Yusuf Latief, Vincent Gaspersz

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.
x
Message