Size and Shape Optimization of Space Trusses Considering Geometrical Imperfection-Sensitivity in Buckling Constraints
Abstract
Optimal design considering buckling of compressive members is an important subject in structural engineering. The strength of compressive members can be compensated by initial geometrical imperfection due to the manufacturing process; therefore, geometrical imperfection can affect the optimal design of structures. In this study, the metaheuristic teaching-learning-based-optimization (TLBO) algorithm is applied to study the geometrical imperfection-sensitivity of members’ buckling in the optimal design of space trusses. Three benchmark trusses and a real-life bridge with continuous and discrete design variables are considered, and the results of optimization are compared for different degrees of imperfection, namely 0.001, 0.002, and 0.003. The design variables are the cross-sectional areas, and the objective is to minimize the total weight of the structures under the following constraints: tensile and compressive yielding stress, Euler buckling stress considering imperfection, nodal displacement, and available cross-sectional areas. The results reveal that higher geometrical imperfection degrees significantly change the critical buckling load of compressive members, and consequently, increase the weight of the optimal design. This increase varies from 0.4 to 119% for different degrees of imperfection in the studied trusses.
Keywords
References
Iwicki, Piotr, and Marcin Krajewski. "3D buckling analysis of a truss with horizontal braces." Mechanics and Mechanical Engineering 17.1 (2013): 49-58.
Foroughi, Hamid, and Mojtaba Azhari. "Mechanical buckling and free vibration of thick functionally graded plates resting on elastic foundation using the higher order B-spline finite strip method." Meccanica 49.4 (2014): 981-993. DOI: 10.1007/s11012-013-9844-2.
Foroughi, H., H. Askariyeh, and M. Azhari. "Mechanical Buckling of Thick Composite Plates Reinforced with Randomly Oriented, Straight, Single-Walled Carbon Nanotubes Resting on an Elastic Foundation using the Finite Strip Method." Journal of Nanomechanics and Micromechanics 3.3 (2013): 49-58. DOI: 10.1061/(ASCE)NM.2153-5477.0000060.
Gholami Shahrestani, Mojtaba, Mojtaba Azhari, and Hamid Foroughi. "Elastic and inelastic buckling of square and skew FGM plates with cutout resting on elastic foundation using isoparametric spline finite strip method." Acta Mechanica. DOI: 10.1007/s00707-017-2082-2.
Cheng, G. "Some aspects of truss topology optimization." Structural and Multidisciplinary Optimization 10.3 (1995): 173-179. DOI: 10.1007/BF01742589.
Guo, X., G. Cheng, and K. Yamazaki. "A new approach for the solution of singular optima in truss topology optimization with stress and local buckling constraints." Structural and Multidisciplinary Optimization 22.5 (2001): 364-373. DOI: 10.1007/s00158-001-0156-0.
Tugilimana, Alexis, Rajan Filomeno Coelho, and Ashley P. Thrall. "Including global stability in truss layout optimization for the conceptual design of large-scale applications." Structural and Multidisciplinary Optimization (2017): 1-20. DOI: 10.1007/s00158-017-1805-2.
Dunning, Peter D., Evgueni Ovtchinnikov, Jennifer Scott, and H. Alicia Kim. "Level‐set topology optimization with many linear buckling constraints using an efficient and robust eigensolver." International Journal for Numerical Methods in Engineering 107.12 (2016): 1029-1053. DOI: 10.1002/nme.5203.
Luo, Quantian, and Liyong Tong. "Elimination of the Effects of Low Density Elements in Topology Optimization of Buckling Structures." International Journal of Computational Methods 13.06 (2016): 1650041. DOI: 10.1142/S0219876216500419.
Cao, Hongyou, Xudong Qian, Zhijun Chen, and Hongping Zhu. "Enhanced particle swarm optimization for size and shape optimization of truss structures." Engineering Optimization (2017): 1-18. DOI: 10.1080/0305215X.2016.1273912.
Foroughi, H., C. D. Moen, A. Myers, M. Tootkaboni, L. Vieira, and B. W. Schafer. "Analysis and design of thin metallic shell structural members-current practice and future research needs." In Proceedings of Annual Stability Conference Structural Stability Research Council, Toronto, Canada. 2014.
Foroughi, H., Schafer, B. W. "Simulation of conventional cold-formed steel sections formed from advanced high strength steel (AHSS)." arXiv preprint arXiv:1712.08037 (2017).
Pedersen, Niels L., and Anders K. Nielsen. "Optimization of practical trusses with constraints on eigenfrequencies, displacements, stresses, and buckling." Structural and Multidisciplinary Optimization 25.5 (2003): 436-445. DOI: 10.1007/s00158-003-0294-7.
Jalalpour, Mehdi, Takeru Igusa, and James K. Guest. "Optimal design of trusses with geometric imperfections: Accounting for global instability." International Journal of Solids and Structures 48.21 (2011): 3011-3019. DOI: 10.1016/j.ijsolstr.2011.06.020.
Madah, Hazem, and Oded Amir. "Truss optimization with buckling considerations using geometrically nonlinear beam modeling." Computers & Structures 192 (2017): 233-247. DOI: 10.1016/j.compstruc.2017.07.023.
Rao, Ravipudi V., Vimal J. Savsani, and D. P. Vakharia. "Teaching–learning-based optimization: a novel method for constrained mechanical design optimization problems." Computer-Aided Design 43.3 (2011): 303-315. DOI: 10.1016/j.cad.2010.12.015.
Holland, John Henry. Adaptation in natural and artificial systems: an introductory analysis with applications to biology, control, and artificial intelligence. MIT press, 1992.
Dorigo, Marco. "Optimization, learning and natural algorithms." Ph.D. Thesis, Politecnico di Milano, Italy (1992).
Kennedy, J. and Eberhart, R. “Particle swarm optimization." Proceedings of IEEE International Conference on Neural Networks IV, pages. Vol. 1000. 1995. DOI: 10.1109/ICNN.1995.488968.
Behrou R., Guest J. K. "Topology optimization for transient response of structures subjected to dynamic loads." 18th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Denver, CO. 2017. DOI: 10.2514/6.2017-3657.
Behrou, Reza, Matthew Lawry, and Kurt Maute. "Level set topology optimization of structural problems with interface cohesion." International Journal for Numerical Methods in Engineering (2017). DOI: doi.org/10.1002/nme.5540.
Rajeev, S., and C. S. Krishnamoorthy. "Discrete optimization of structures using genetic algorithms." Journal of structural engineering 118.5 (1992): 1233-1250. DOI: 10.1061/(ASCE)0733-9445(1992)118:5(1233).
Cao, Guozhong. "Optimized design of framed structures using a genetic algorithm." PhD thesis, The University of Memphis, TN (1997).
Fourie, P. C., and Albert A. Groenwold. "The particle swarm optimization algorithm in size and shape optimization." Structural and Multidisciplinary Optimization 23.4 (2002): 259-267. DOI: 10.1007/s00158-002-0188-0.
Gomes, Herbert Martins. "Truss optimization with dynamic constraints using a particle swarm algorithm." Expert Systems with Applications 38.1 (2011): 957-968. DOI: 10.1016/j.eswa.2010.07.086.
Kaveh, A., and A. Zolghadr. "Democratic PSO for truss layout and size optimization with frequency constraints." Computers & Structures 130 (2014): 10-21. DOI: 10.1016/j.compstruc.2013.09.002.
Camp, Charles V., and Barron J. Bichon. "Design of space trusses using ant colony optimization." Journal of Structural Engineering130.5 (2004): 741-751. DOI: 10.1061/(ASCE)0733-9445(2004)130:5(741).
Toğan, Vedat, and Ali Mortazavi. "Sizing optimization of skeletal structures using teaching-learning based optimization." An International Journal of Optimization and Control: Theories & Applications (IJOCTA) 7.2 (2017): 130-141. DOI: 10.11121/ijocta.01.2017.00309.
Makiabadi, M. H., A. Baghlani, H. Rahnema, and M. A. Hadianfard. "Optimal design of truss bridges using teaching-learning-based optimization algorithm." Iran University of Science & Technology 3.3 (2013): 499-510.
Toğan, Vedat. "Design of planar steel frames using teaching–learning based optimization." Engineering Structures 34 (2012): 225-232. DOI: 10.1016/j.engstruct.2011.08.035.
Camp, C. V., and M. Farshchin. "Design of space trusses using modified teaching–learning based optimization." Engineering Structures 62 (2014): 87-97. DOI: 10.1016/j.engstruct.2014.01.020.
Saka, M. P. "Optimum design of pin-jointed steel structures with practical applications." Journal of Structural Engineering 116.10 (1990): 2599-2620. DOI: 10.1061/(ASCE)0733-9445(1990)116:10(2599).
Schutte, J. F., and A. A. Groenwold. "Sizing design of truss structures using particle swarms." Structural and Multidisciplinary Optimization 25.4 (2003): 261-269. DOI: 10.1007/s00158-003-0316-5.
Bauman, John. "West End Bridge." Written Historical and Descriptive Data Historic American Engineering Record, National Park Service, U.S. Department of the Interior, 1985. From Data Pages, Library of Congress (HAER No. PA-96, available online at: http://cdn.loc.gov/master/pnp/habshaer/pa/pa1700/pa1732/data/pa1732data.pdf, accessed Oct. 21, 2017).
DOI: 10.28991/cej-030960
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 Fardad Haghpanah, Hamid Foroughi
This work is licensed under a Creative Commons Attribution 4.0 International License.
