Investigating the Behavior of Offshore Platform to Ship Impact

Rafi M. Qasim, Abdulameer Qasim Hasan

Abstract


Offshore platform structure has the ability to resist wave loading, wind loading, operation loading, and ship collision, therefore, it is important to investigate the structural behavior of platform taking into consideration soil-structure-pile interaction when the platform is subjected to ship impact at a different location on deck slab. The present study deals with platform supported by pile foundation. The effect of soil-pile interaction on behavior of platform to lateral impact load is investigated by using finite element simulation which is performed by ABAQUS software. From the results obtained, it is obvious that the ship collision position on platform will be reflected on ultimate capacity of structure so the structure will undergo to loose ultimate capacity due to damage that occurs from the ship collision. This study comprises investigation of pile lateral displacement, pile twist angle, pile shear force distribution, pile bending moment distribution and deck slab displacement. It also clarifies that the pile displacement has been reflected on pile critical length. The twist angle of the pile is more sensitive to soil type and loading condition. It is seems that the shear force distribution and bending moment distribution are affected by loading condition and soil type. Finally this study shows that the response of deck slab depends on soil type, soil-pile interaction and loading condition.


Keywords


Ship Impact; Offshore Platform; Clay Soil; Loading Condition.

References


British Standard Institute, "British Standard Code of practice for fixed offshore structures", BS 6235 (1982).

British Standard Institute, "British Standard Code of practice for maritime structures", BS 6349 (1985), Part4.

Gaythwaite, John W. “Design of Marine Facilities for the Berthing, Mooring, and Repair of Vessels” (September 17, 2004). doi:10.1061/9780784407264.

Edvardsen, G., J. Lereim, and O. P. Torset. "Evaluation of Jacket Substructures Subjected to Impact Loads from Vessels and Dropped Objects." In Offshore structures engineering, volume 5: proceedings of the 4th International Symposium on Offshore Engineering held at COPPE, Federal University of Rio de Janeiro, Brazil, September, 1983, vol. 5, p. 460. Gulf Publishing, 1984.

Amdahl, J. Energy Absorption in Ship-platform Impacts. Division of Marine Structures, University of Trondheim. Report No. UR-83-34, Trondheim, Norway, September, 1983.

Wierzbicki, T., and M.S. Suh. “Indentation of Tubes Under Combined Loading.” International Journal of Mechanical Sciences 30, no. 3–4 (January 1988): 229–248. doi:10.1016/0020-7403(88)90057-4.

Al-Jasim, Samir. “Dynamic Analysis of Offshore Template Structures with Soil-Structure Interaction.” PhD Thesis, University of Basrah, March (2000).

Hussain, A. H. “Dynamic Analysis of Offshore Structures using Finite Element Method.” M. Eng. thesis, Engineering College Basrah University (2003).

Kadim. A. J., “Dynamic analysis of offshore steel structures using finite element method.” PhD Thesis, University of Basrah, (2013).

Travanca, Joao, and Hong Hao. “Dynamics of Steel Offshore Platforms under Ship Impact.” Applied Ocean Research 47 (August 2014): 352–372. doi:10.1016/j.apor.2014.07.004.

Hasan. A. Q. , “Dynamic analysis of steel offshore structures considering the effect of soil-structure interaction.” PhD Thesis, University of Basrah, (2016).

Liu, Kun, Bin Liu, R. Villavicencio, Zili Wang, and C. Guedes Soares. “Assessment of Material Strain Rate Effects on Square Steel Plates Under Lateral Dynamic Impact Loads.” Ships and Offshore Structures 13, no. 2 (July 24, 2017): 217–225. doi:10.1080/17445302.2017.1354659.

Qasim, Abdulameer, Anis A, and Mohamad J. “Evaluate The Cylindrical Rubber Fender Response Under Dynamic Load.” Seventh International Conference on Advances in Civil and Structural Engineering - CSE 2017 (July 2, 2017). doi:10.15224/978-1-63248-127-6-32.

Liu, Kun, Bin Liu, Zili Wang, Ge (George) Wang, and C. Guedes Soares. “An Experimental and Numerical Study on the Behaviour of Tubular Components and T-Joints Subjected to Transverse Impact Loading.” International Journal of Impact Engineering 120 (October 2018): 16–30. doi:10.1016/j.ijimpeng.2018.05.007.

Kazemi Daliri, Aidin, and Sepanta Naimi. “Transient Dynamic Analysis of the High-Specific-Strength Steel Jacket with Extreme Wave and Vessel Impact Load.” Acta Scientiarum. Technology 40, no. 1 (September 1, 2018): 36633. doi:10.4025/actascitechnol.v40i1.36633.

Li, Ruoxuan, Daisuke Yanagihara, and Takao Yoshikawa. “Axial Compressive Residual Ultimate Strength of Circular Tube after Lateral Collision.” International Journal of Naval Architecture and Ocean Engineering 11, no. 1 (January 2019): 396–408. doi:10.1016/j.ijnaoe.2018.07.005.

Naylor, David John, Gyanendra Nath Pande, B. Simpson, and R. Tabb. "Finite elements in geotechnical engineering." Pineridge Press Ltd. Swansea, U. K.(SW/75), 1981, 245 (1981).

Poulos, Harry George, and Edward Hughesdon Davis. “Pile Foundation Analysis and Design.” No. Monograph, Canada: Rainbow Bridge Book, (1980).

Bowles J. E. “Foundation Analysis and Design,” 5th Ed. New York: The McGraw-Hill, (1997).

Braja M. Das, “Principles of Foundation Engineering,” 7th. Ed., Australia: CENGAGE Learning, (2011).


Full Text: PDF

DOI: 10.28991/cej-2020-03091486

Refbacks

  • There are currently no refbacks.




Copyright (c) 2020 Rafi mohammed qasim

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.
x
Message