Investigating the Local Buckling of Rectangular Corrugated Plates
Abstract
With advances in technology in recent years, the use of orthotropic materials to exclude the mechanical deficiencies of homogeneous plates has increased. Sinusoidal corrugated plates are known as orthotropic plates, as a result of changes in their mechanical properties in two orthogonal directions. Since use of corrugated plates, in particular steel shear walls instead of flat steel plates, has increased, the present study investigated local buckling of sinusoidal corrugated plates under uniform uniaxial loading on the transverse edges of the plate (vertical loading on the sinusoidal wave of corrugated plates), using the Galerkin method. This method is very powerful with regard to solving differential equations, and directly uses these equations in the process of problem-solving. Finally, the results obtained for the critical buckling load of sinusoidal corrugated metal plates and the results relating to the metal homogeneous flat plates were compared using the same supporting conditions and loading.
Keywords
References
Wei-Wen Yu, Roger A. Laboube, "Cold-Formed Steel Design", Fourth Edition, 2010.
Leo, R., Edlund, B., "Buckling analysis of Trapezoidally Corrugated paneles using Spline Finite strip method", Thin Walled Structures, No.18, PP. 209-224, 1994.
Qiang Li, G., Jiang, j., Zhu, Q., "Local buckling of compression flange of H-beams with corrugated webs", Journal Constructional Steel Research, No.112, PP.69-79, 2015.
Liew, KM, Peng, LX, Kitipornchai, S. "Buckling analysis of corrugated plates using a mesh-free Galerkin method based on the first-order shear deformation theory", Comput Mech, No.38, PP 61-75, 2006.
Zaman Kabir, Mohammed and Ali Karbasi, Investigate the Shear Buckling of Thin Steel Shear Walls with Smooth and Corrugated Plates, First National Conference on Iran Structural Engineering, Tehran, Iran Structural Engineering Scientific Society, 2014.
Babaqassabha, Vahid and Ali Shaghaghi Moghaddam, Numerical Analysis of Composite Flat and Corrugated Sandwich Buckling Plates with Soft Core, the National Conference of Iran Mechanical Engineering, Shiraz, Shiraz University, Institute of International Education and Research Khwarizmi of Safashahr, 2013.
Babaqassabha, Vahid and Arash Naeimi Abkenari, Free Vibration of Corrugated Composite Sandwich Plate Coated with Aluminum Flat, the First Union Conference of Development-oriented Civil Engineering, Architecture, Electrical and Mechanical of Iran, Gorgan, Civil Engineering Company, Building Plan in Collaboration with Golestan University, Golestan University, 2013.
Garivani, Ahmad and Maryam Moqimi, Evaluating the Performance of Steel Plate Beam with Corrugated Web, the First Union Conference of Development-oriented Civil Engineering, Architecture, Electrical and Mechanical of Iran, Gorgan, Civil Engineering Company, Building Plan in Collaboration with Golestan University, Golestan University, 2014.
Esmaeilzadeh, Seyyed Mohsen and Ehsan Shabanzadeh, The Use of Corrugated Plate instead of Simple Plate Steel Shear Walls, the Second National Conference of Structures, Earthquake and Geotechnics, Babolsar, Institutions of Higher Learning of Pardisan, 2012.
Rostami, Yosef, Morteza Naghipour and Gholamreza Abdullah Zadeh, the Elastic Shear Buckling Resistance of Zigzag Corrugated Steel Plates, the Seventh National Congress of Civil Engineering, Zahedan, Sistan and Baluchestan University, 2013.
Nakhaei, Ali, Amir Tazeh mehr, Naghi Khastar and Seyyed Abolfazl Chahkandi, Study the System Behavior of Non-prismatic Plate Beam and Trapezoidal Corrugated Plates Using ABAQUS Software, National Conference of Applied Civil Engineering on Modern achievements, Karaj, Kavir Structure Company, 2013.
Moodi, Yaser and Mohammadreza Ghasemi, Shear Buckling of Steel Corrugated Webs (Corrugated Cardboard), the Eighth National Congress of Civil Engineering, Babol, Noshirvani Industrial University, 2013.
Valadi, Hedayat and Tawhid Assadi Aghajari, Examines the Impact of Different Widths of Corrugated Zigzag Plates on Seismic Behavior of Corrugated Steel Shear Walls under Monotonic and Cyclic Loading, the First International Conference on Urban Construction in the Vicinity of Active Faults, Tabriz, Tabriz Municipality, 2011.
Ali Nia, M, Theory of Plates and Shells, Ashtian Publications, Tehran, 2010.
Ugural, A. C., "Stresses in plates and shells", McGraw-Hill Book Co.1981.
Jaberzadeh, E. Azhari, M. "Elastic and inelastic local buckling of stiffened plates subjected to non-uniform compression using the Galerkin method", Applied Mathematical Modelling, Vol.33, pp.1874-1885, 2009.
Jaberzadeh, A., Stability Analysis of Rectangular Plates with Intermediate Amplifier Using Galerkin Method, Faculty of Civil Engineering, Isfahan University of Technology, 2007.
Azhari, M., Bradford, M.A., "Buckling of plates with different end conditions using the finite strip method", Computers and structures, 1995, Vol.56, No.1, PP.75-83.
Eduard Ventsel, "Thin Plates and Shells", Marcel Dekker Inc., 2001.
DOI: 10.28991/cej-2016-00000043
Refbacks
- There are currently no refbacks.
Copyright (c) 2016 Vahid Abdolvahab
This work is licensed under a Creative Commons Attribution 4.0 International License.
